Full cleaning kit

The POPPIT™ SYSTEM START UP KIT for a chlorine free inground or portable spa.

4-way test strips

There are basically three elements that need to be balanced – pH, Total Alkalinity, and Calcium Hardness. Poppit 4 Way test strips should be used as a simple test for the levels of each of these, as well as Hydrogen Peroxide.

Filter cleaner

Some body fats cannot be removed from your Filter Cartridge simply by hosing it down. Just as cold water alone doesn’t remove fat and grease from a frying pan, cold water will not remove all the fats in the filter. Poppit Filter Cartridge Cleaner cleans and degreases your filter Cartridges by oxidising - burning up the fats – without harming the filter cartridge. Regular use of Poppit Filter Cleaner (every 1-2 weeks) will prevent cloudy, smelly spa water and prolong the life of the filter cartridge.

Pipe Degreaser

Poppit Spa Pipe Degreaser is ideal for cleaning water pipes around spas removing body fats, algae, shed skin and hair which accumulate in the spa pipes after spa use. Always use Poppit Spa Pipe Degreaser just before dumping the spa water!

First remove the filter cartridge. Then add 50mls of Poppit Spa Pipe Degreaser to every 1000 litre of spa water. Avoid overdosing as using too much Poppit Spa Pipe Degreaser may result in foaming.

Turn blower on and off several times to flush softened fats from the pipes, then circulate water for between 30 – 60 minutes depending on the amount of debris build-up in the pipes. Dump water and hose out jets.

Note: If you have an in ground spa, always leave one quarter of the water in the bottom (only remove three quarters of the water) this will prevent the spa from popping out of the ground.

When the spa is empty wipe the inside of the spa with Poppit Spa Pipe Degreaser on a cloth and rinse spa thoroughly to remove all traces of degreaser prior to refilling.

Spa sanitiser

Poppit Spa Sanitiser uses hydrogen peroxide to oxidise the bacteria and organic materials in the spa water. It is totally safe and does not leave you smelling of chlorine when you leave the spa. Poppit Spa Sanitiser is allergy free and is gentle on the skin compared with other sanitisers. Another benefit is that Poppit Spa Sanitiser is environmentally friendly and biodegradable. Poppit Spa Sanitiser cleans and conditions the spa in one action. The spa conditioner prevents the build-up of organic slime on the spa walls and seats. Available in 5 or 15 litre packs, Poppit Spa Sanitiser will help keep your spa water clear and odour free.

Heat spa water to desired temperature (generally between 26 – 36 degrees C.) Add Poppit Spa Sanitiser – at the rate of 1 litre per 1000 litre of water. Your spa is now ready for your enjoyment. Remember to run filter for approximately 4 hours per day and after each use.

Quick Fix

Poppit Quick Fix is recommended when initially starting up your new spa and also for weekly maintenance. Dosage rates are 60grams/1000 litre with new water and 30grams/1000 litre as a maintenance level. Premix the chemical, pour into the spa and, with the spa cover removed filter for 4 hours. Poppit Quick Fix is a chlorine free oxidiser ideal for the regular cleaning and maintenance of spas as well as those in need of a quick clean up. Excessive organic material in spa water causes cloudiness and an odour. Poppit Quick Fix will rapidly burn up the organic material.

Full cleaning kit